Technicolor - Thomson ST585 V6 - Manual (Page 65)

E-DOC-CTC-20061027-0004 v1.0
ATM Commands
41
atm debug aal5stats
Display ATM Adaptation Layer 5 (AAL5) port specific ATM statistics.
SYNTAX:
where:
RELATED COMMANDS:
atm debug aal5stats port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
vpi =
[vci = ]
[clear = <{disabled | enabled}>]
port The port number for which statistics will be retrieved.
Choose between:
> DSL0
> DSL1
> ATM2
> ATM3
> AAL5
> ATM5
Or specify a port number (dsl0 has port number 0).
REQUIRED
vpi A number between 0 and 15.
Represents the Virtual Path Identifier (VPI) number for which statistics will
be retrieved. REQUIRED
vci A number between 0 and 511.
Represents the Virtual Channel Identifier (VCI) number for which statistics
will be retrieved. OPTIONAL
clear Enable or disable clearing of the statistics after request. OPTIONAL
atm debug gstats Display ATM global statistics.
atm debug portstats Display port specific ATM statistics.