Technicolor - Thomson ST585 V6 - Manual (Page 396)

E-DOC-CTC-20061027-0004 v1.0
GRP Commands
372
grp config
Set the Generic Routing Protocol (GRP) configuration settings.
SYNTAX:
where:
EXAMPLE:
grp config [cdistance = ]
[kdistance = ]
[rdistance = ]
[trace = <{disabled | enabled}>]
cdistance A number between 0 and 255.
Sets the distance of the connected route type.
The default is
0 .
OPTIONAL
kdistance A number between 0 and 255.
Sets the distance of the kernel route type.
The default is
1 .
OPTIONAL
rdistance A number between 0 and 255.
Sets the distance of the RIP route type.
The default is
120 .
OPTIONAL
trace Enable or disable verbose console messaging.
The default is
disabled .
OPTIONAL
=>grp config
Distance of the connected route type : 0
Distance of the kernel route type : 1
Distance of the RIP route type : 120
Tracing : disabled
=>