Snmp config, Snmp commands, Syntax – Technicolor - Thomson ST585 V6 User Manual
Page 668: Example
E-DOC-CTC-20061027-0004 v1.0
SNMP Commands
644
snmp config
Show/set global Simple Network Management Protocol (SNMP) parameters.
SYNTAX:
where:
EXAMPLE:
snmp config
[sysContact =
[sysName =
[sysLocation =
sysContact
The SNMP system contact.
The default is
Service Provider
.
OPTIONAL
sysName
The SNMP system name.
OPTIONAL
sysLocation
The SNMP system location.
The default is
Customer Premises
.
OPTIONAL
=>snmp config
SNMP System Contact
: Service Provider
SNMP System Name
: SpeedTouch 620
SNMP System Location
: Customer Premises
All SNMP traps
: ENABLED
Delay, in secs before first trap is sent
: 90
=>