Technicolor - Thomson ST585 V6 - Manual (Page 655)

E-DOC-CTC-20061027-0004 v1.0
Service Commands
631
service host rule add
Create/define a host service portmap.
SYNTAX:
where:
RELATED COMMANDS:
service host rule add name =
[protocol = <{any|tcp|udp} or number>]
[baseport = ]
portrange =
[triggerport = ]
[triggerprotocol = <{any|tcp|udp} or number>]
name The name of the host service. REQUIRED
protocol The IP protocol type.
Choose between:
> any
> tcp
> udp
> a number.
OPTIONAL
baseport The inbound base port.
Select one of the supported TCP/UDP port names (see
“ Supported TCP/UDP Port Names” on page 787 ) or,
alternatively, specify the port number.
Note If not specified, baseport is equal to the first port of
portrange .
OPTIONAL
portrange The outbound port range. REQUIRED
triggerport The outbound trigger port.
Select one of the supported TCP/UDP port names (see
“ Supported TCP/UDP Port Names” on page 787 ) or,
alternatively, specify the port number.
OPTIONAL
triggerprotocol Protocol of the trigger port.
Choose between:
> any
> tcp
> udp
> a number.
Note If not specified, triggerprotocol is equal to protocol .
OPTIONAL
service host rule delete Delete a host service portmap.