Technicolor - Thomson ST585 V6 - Manual (Page 72)

E-DOC-CTC-20061027-0004 v1.0
ATM Commands
48
atm oam ping
Send ATM loopback cells.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
atm oam ping dest =
[count = ]
[interval = ]
dest The destination address for the request.
This can be any ATM phonebook entry. REQUIRED
count A number between 1 and 1000000.
Represents the number of pings to send. OPTIONAL
interval A number between 100 and 1000000 (milliseconds).
Represents the interval between packets. OPTIONAL
=>atm oam ping dest=atm_ph_8_35 count=10 interval=1000
loopback: successful, sequence: 1 time: 37890 usec
loopback: successful, sequence: 2 time: 39118 usec
loopback: successful, sequence: 3 time: 39116 usec
loopback: successful, sequence: 4 time: 39187 usec
loopback: successful, sequence: 5 time: 38605 usec
loopback: successful, sequence: 6 time: 38764 usec
loopback: successful, sequence: 7 time: 38752 usec
loopback: successful, sequence: 8 time: 38813 usec
loopback: successful, sequence: 9 time: 38848 usec
loopback: successful, sequence: 10 time: 38941 usec
--- loopback statistics ---
10 loopbacks transmitted, 10 successful, 0% loss, time 1390 ms
rtt min/avg/max = 37890/38803/39187
=>
atm oam config Modify the ATM Operation and Maintenance (OAM) settings.
atm oam list Display the ATM OAM settings.
atm oam modify Modify the ATM OAM data blocking mode.