Ppp commands – Technicolor - Thomson ST585 V6 User Manual
Page 611
E-DOC-CTC-20061027-0004 v1.0
PPP Commands
587
silent
Do not send anything at startup and just listen for incoming LCP
messages (enabled) or retry up to 10 times to establish the
connection (disabled).
The default is
disabled
.
OPTIONAL
echo
Send LCP echo requests at regular intervals (enabled) or not
(disabled).
The default is
disabled
.
OPTIONAL
mru
A number between 293 and 8192.
Represents the maximum packet size the Thomson ST should
negotiate to be able to receive.
The default is
1492
.
OPTIONAL
laddr
The local IP address of the peer-to-peer connection.
Specifying a local IP address forces the remote side of the PPP link (if
it allows to) to accept this IP address as the Thomson ST PPP session
IP address.
If not specified, the Thomson ST will accept any IP address.
Typically the local IP address parameter is not specified.
OPTIONAL
raddr
The remote IP address of the peer-to-peer connection.
Specifying a remote IP address forces the remote side of the PPP link
(if it allows to) to accept this IP address as its PPP session IP address.
If not specified, the Thomson ST will accept any IP address.
Typically the remote IP address parameter is not specified.
OPTIONAL
netmask
The subnetmask associated with this address.
Specifying a subnetmask forces the remote side (if it allows to) to
accept this subnetmask as the PPP session subnetmask.
If not specified, the Thomson ST will accept any subnetmask.
The Thomson ST will only request/accept a subnetmask if a DHCP
server pool is associated, in other words, if the [pool] parameter is
specified.
OPTIONAL
format
The negotiated subnetmask specified in the netmask parameter is
specified in the dotted format (dotted) or in Classless Inter Domain
Routing (CIDR) format (cidr).
The default is
cidr
.
OPTIONAL
pool
The name of the free DHCP server pool to which the acquired IP
subnet must be assigned.
OPTIONAL
savepwd
Save password (enabled), if supplied, or do not save the password
(disabled).
The default is
disabled
.
OPTIONAL
demanddial
Enable or disable the dial-on-demand feature.
The default is
disabled
.
OPTIONAL
doddelay
A number between 0 and 3600 (seconds).
During this initial interval, packets do not trigger the PPP interface.
OPTIONAL
primdns
The IP address of the primary DNS server.
In case a primary DNS server is specified, the Thomson ST will
negotiate this IP address with the remote side.
Note
If not specified, the Thomson ST will accept any IP address.
OPTIONAL
secdns
The IP address of the (optional) secondary DNS server.
In case a secondary DNS server is specified, the Thomson ST will
negotiate this IP address with the remote side.
Note
If not specified, the Thomson ST will accept any IP address.
OPTIONAL