Technicolor - Thomson ST585 V6 - Manual (Page 62)

E-DOC-CTC-20061027-0004 v1.0
ATM Commands
38
atm cac config
Configure the ATM connection admission control.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
atm cac config config port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or
number>
state = <{disabled|enabled}>
config
port The port for which CAC is configured. REQUIRED
state Enable/disable CAC for an ATM port. REQUIRED
{Administrator}=>atm cac config
port = dsl0
state = enabled
:atm cac config port=dsl0 state=enabled
{Administrator}=>
atm cac list Display all the CAC parameters.
atm cac overbooking Configure ATM overbooking parameters.