Technicolor - Thomson ST585 V6 - Manual (Page 70)

E-DOC-CTC-20061027-0004 v1.0
ATM Commands
46
atm oam modify
Modify the ATM OAM data blocking mode.
SYNTAX:
where:
atm oam modify port = <{dsl0} or number>
blocking = <{disabled | enabled}>
port The port for which OAM blocking is configured.
Choose between:
>
DSL0
Or specify a port number (dsl0 has port number 0).
REQUIRED
blocking Enable or disable the OAM data blocking mode on this port.
The default is
enabled .
REQUIRED