Technicolor - Thomson ST585 V6 - Manual (Page 601)

E-DOC-CTC-20061027-0004 v1.0
NAT Commands
577
nat tmpllist
Display the address mapping templates.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
nat tmpllist [expand = <{disabled | enabled}>]
expand Enable or disable expanded listing.
The default is
disabled .
OPTIONAL
=>nat tmpllist
Idx Type Interface
Ifgroup Outside Address Inside Address
Use
1 NAPT any
lan 100.200.100.1 unmapped
0
2 NAPT myPPP_ppp
any 100.100.100.1 unmapped
0
=>
nat tmpladd Add an address mapping template.
nat tmpldelete Delete an address mapping template.
nat tmplinst Instantiate address mapping templates for a given dynamic address.