Technicolor - Thomson ST585 V6 - Manual (Page 694)

E-DOC-CTC-20061027-0004 v1.0
System Commands
670
system config
Set/change the system configuration parameters.
SYNTAX:
where:
!
For a good operation of UPnP and the discovery mechanism, it is highly recommended not to
change the system configuration settings.
system config [upnp = <{disabled | enabled}>]
[tr64 = <{disabled | enabled}>]
[mdap = <{disabled | enabled}>]
[drst = <{disabled | enabled}>]
[led = <{green | red | orange | flash | off}>]
[resetbutton = <{disabled | enabled}>]
[digestauth = <{disabled | enabled}>]
[defaultconnection = ]
[rtc = <{disabled|enabled}>]
[autosave = <{disabled | enabled}>]
[autosavedelay = ]
upnp Enable or disable UPnP discovery.
The default is
enabled .
OPTIONAL
tr64 Enable or disable TR-64 discovery.
The default is
disabled .
OPTIONAL
mdap Enable or disable proprietary discovery protocol.
The default is
enabled .
OPTIONAL
drst Enable or disable DrSpeedTouch access.
The default is
disabled .
OPTIONAL
led Set the system LED colour.
Choose between:
> green : solid green
>
red : solid red
>
orange : solid orange
>
flash : toggle between green and orange
>
off : LED is off.
The default is green .
OPTIONAL
resetbutton Enable or disable reset-to-factory-defaults pushbutton.
The default is
enabled .
OPTIONAL
digestauth Enable or disable HTTP digest authentication.
The default is
enabled .
OPTIONAL
defaultconnection The name of the default internet connection. OPTIONAL
rtc Enable or disable RTC.
The default is
disabled
OPTIONAL
autosave Enable or disable autosaves.
The default is
enabled .
OPTIONAL