Technicolor - Thomson ST585 V6 - Manual (Page 592)

E-DOC-CTC-20061027-0004 v1.0
NAT Commands
568
outside_port The outside port number or range (only for maps of type napt ).
>
For a NAPT map: Represents the range of TCP/UDP ports to be
used as dynamic port range during the NAPT process.
> For a port-shifting map: Represents the source port(s) to be
translated (shifted) into
inside_port .
Allowed values are:
> TCP/UDP port range [P-Q] (with Q > P)
> TCP/UDP port number (only for port-shifting maps).
OPTIONAL
for NAPT
map.
REQUIRED
for port-
shifting map.
inside_port The inside port number or range (only for maps of type napt ).
If this parameter is specified for a map of type napt , then this map is
a port-shifting map.
Represents the target TCP/UDP ports to which the traffic has to be
shifted.
Allowed values are:
> TCP/UDP port range [P-Q] (with Q > P)
> TCP/UDP port number (only for port-shifting maps).
Note The size of inside_port must be identical to the size of
outside_port .
REQUIRED
for port-
shifting map
mode The mode to create the portmap.
Choose between:
> auto
> inbound
> outbound.
The standard is auto .
OPTIONAL