Ppp ifscan, Ppp commands, Syntax – Technicolor - Thomson ST585 V6 User Manual
Page 619: Example
E-DOC-CTC-20061027-0004 v1.0
PPP Commands
595
ppp ifscan
Scan a PPPoE interface for available Access Concentrator and Service names.
SYNTAX:
where:
EXAMPLE:
i
Use the command
:ppp ifdetach for this interface before performing a scan on it.
ppp ifscan
intf =
[time =
intf
The name of the PPPoE interface to be scanned.
REQUIRED
time
A number between 0 and 36000 (seconds).
Represents the time to scan for services.
OPTIONAL
=>ppp iflist
myRtPPPoE: dest : RtPPPoE_eth
[00:00:00]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
mru = 1492
route : dst=0.0.0.0/0 - src=10.0.0.0/1 (metric 1)
auth = auto
user = johndoe@ISP
password = ********
admin state = down
oper state = down
link state = not-connected
LCP : state = initial
retransm = 9
term. reason =
IPCP: state = initial
retransm = 0
term. reason =
acname : ---
service : ---
=>ppp ifscan intf=myRtPPPoE time=45
Service Name
Access Concentrator
Done !
=>