Technicolor - Thomson ST585 V6 - Manual (Page 658)

E-DOC-CTC-20061027-0004 v1.0
Service Commands
634
service system ifdelete
Delete an interface group from the access list.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
service system ifdelete name =
group = <{wan|local|lan|tunnel|dmz|guest} or
number>
name The name of the system service for this access list. REQUIRED
group The interface group for this access list. REQUIRED
=>service system list name=SIPPBX expand=enabled
Idx Name
Protocol SrcPort DstPort Group State
---------------------------------------------------------------------------------
1 SIPPBX udp 5060 disabled
Description................ SIP PBX, registrar and proxy
Properties................. server
Managed parameters......... state port acl map log
Source Ip Selection........ auto
Interface Access List...... lan
Ip Access List............. any
NAT Port List.............. 5060
=>service system ifdelete name=SIPPBX group=lan
=>service system list name=SIPPBX expand=enabled
Idx Name
Protocol SrcPort DstPort Group State
---------------------------------------------------------------------------------
1 SIPPBX udp 5060 disabled
Description................ SIP PBX, registrar and proxy
Properties................. server
Managed parameters......... state port acl map log
Source Ip Selection........ auto
Interface Access List...... any
Ip Access List............. any
NAT Port List.............. 5060
=>
service system ifadd Add an interface group to the access list.