Follett VERSION 6.00 - Manual (Page 683)

04/04 683 Appendix F Using a PHD Dolphin+
PHD Dolphin+ Main Menu
Battery Indicator.
A solid battery, or
one with a checkmark,
indicates a full charge.
Number-key mode Indicator.
Shows the current mode -
numeric or alpha.
There are two ways to return to the Main Menu:
S Press the
ON SCAN
key when not in scanning mode.
S Press the
BKSP
key repeatedly.
Procedures
In this section are the procedures, in abbreviated form, that you can perform
using the PHD Dolphin+.
Note: Before performing any of these procedures, charge the PHD Dolphin+ in
the HomeBase for at least six hours, and erase any pre-existing scans from
the PHD Dolphin+.
Loading the PHD Dolphin+ application
On the computer:
1. Open System Setup | Setup | Site.
2. Click the PHD tab.
3. Select the PHD Dolphin+ radio button.
4. Check your PHD settings.
On the PHD Dolphin+:
5. Insert the PHD Dolphin+ into the HomeBase.
6. From the Main Menu, press
F4
-Setup.
7. Press
F3
-Update Software.
On the computer:
8. Click Load.
The application may take 4-5 minutes to fully load. Do not remove the PHD
Dolphin+ from the HomeBase until the Main Menu reappears.