IAI America IA-101-X-USBMW - Manual (Page 238)

16.
Appendix
230
3. Transfer of Actuator Specific Parameters
Display the Select Parameter Category form from the parameter file for recovery in the same way as the
previous section. Then, make settings in the Select Parameter Category form (Fig. 17.8) as shown below.
[1] Select Specific Axis, Driver and Encoder in the General parameter categories group.
[2] Select Transfer all selected parameters under Select parameter transfer options.
After completing the above settings, click the OK button.
Fig. 17.8 Transfer of Actuator Specific Parameters
Once the OK button has been clicked, a dialog in Fig. 17.9 will be displayed. Select Yes to execute parameter
transfer.