IAI America IA-101-X-USBMW - Manual (Page 175)

11. Monitor
167
Yes (Y) Write the memory data to the flash ROM.
No (N) Do not write the memory data to the flash ROM.
When a reset is performed (by turning off the power and then turning it back on, or
resetting the software), the memory data will be destroyed and data will be loaded from
the flash ROM. (The controller will use the transferred memory data until the reset
takes effect.)
(Note) If a reset is performed (by turning off the power and then turning it back on, or resetting the
software) without writing the parameters to the flash ROM first, the threshold under the alert
function will not be changed and the value set before the change will be restored.
(Note) The flash ROM can be written only for so many times (approx. 100,000 times).
Unless all data are written, select "Write the selected data areas" before writing to the flash ROM.
When the flash ROM has been written, the confirmation message, "Do you want to restart the controller?"
appears.
Fig. 11.24 Confirmation
Yes (Y) Restart the controller (reset the software).
No (N) Do not restart the controller (reset the software).