IAI America IA-101-X-USBMW - Manual (Page 141)

9. Symbol Edit W
indow
133
9.2 Explanation of the Symbol Edit Window
(1) Click Symbol (Y) from the menu bar, and then select Edit (E).
(2) The symbol edit window (Edit Symbol) will open.
Save to File
Clicking this button will open a dialog box where you can save the parameter data to a file under a
desired name.
Note: For the X-SEL-P/Q, PX/QX controller compatible with increased memory (with gateway
function), or R/S, RX/SX, and RXD/SXD, symbols of programs No.65 or later and positions
No.4001 or later cannot be saves by the Symbol File Format 1 (normal format). Save them by
the Symbol File Format 2 (extended format).
Transfer to Controller
Clicking this button will transfer the parameter data to the controller.
Print
Clicking this button will print the parameter data.
* The above symbol edit window is for integer variables. You can display other symbols by clicking each
category tab.
(3) Right-click in the symbol edit window will display the pop-up menu which has the options of Cut (T), Copy
(C) and Paste (P).
The cut or copied data can be pasted only in the symbol edit window. (The data cannot be pasted in the
other windows such as the program edit window and position data edit window.)
(Supported by software version 4.0.0.0 or later)