IAI America IA-101-X-USBMW - Manual (Page 101)

5. Copying/Moving/Clearing a Program
93
This is not displayed
for SSEL, ASEL and
PSEL
For SSEL, ASEL and PSEL or X-SEL-P/Q and PX/QX compatible with increased memory (with
gateway function) or R/S, RX/SX and RXD/SXD, the following dialog boxes will be displayed.
(PC interface software version 7.2.0.0 or later)
Fig. 5.4 Confirmation Fig. 5.5 Confirmation
(X-SEL-P/Q, R/S, SSEL, ASEL, PSEL) (X-SEL-PX/QX, RX/SX, RXD/SXD)
Click and select a desired item (Program, etc.) to write to the flash ROM.
x
Click Yes (Y) ĺ The memory data will be written to the flash ROM.
x Click No (N) ĺ The memory data will not be written to the flash ROM.
Once the controller is reset (the controller power is reconnected or a software
reset is executed), the original program arrangement before the copy or move will
be restored.
* The number of writing to the flash ROM is limited. (approx. 100,000 times)
If you do not want to write all the data to the flash ROM, select "Write selected data region."