IAI America IA-101-X-USBMW - Manual (Page 113)

6. Position Data Edit W
indow
105
Move Continuously
Clicking this button will move all axes indicated by (in the case of the SCARA axis, the 1st arm,
2nd arm, and R-axis are interlocked) to the position of the position number corresponding to the
cursor position. Thereafter, each axis will continue to move to the position set by the data in next
position number.
(Note) The SCARA axis and orthogonal axis cannot be moved simultaneously.
In the case of the X-SEL-RXD/SXD controller, axes of two SCARA robots cannot be moved
continuously.
* If any of the applicable position data has been changed, transfer the latest position data to the
controller first.
Stop All Axes
Clicking this button will stop all axes currently moving.
If a checkmark is placed in the checkbox of this button, the
axis-specific button/setting screen (Fig. 6.3 [example of
X-SEL-JX/KX]) will be displayed. If the checkmark is not placed, the
position data will only be displayed (Fig. 6.13 [example of
X-SELJX/KX]).
Fig. 6.20 Screen of Position Data Only (Example of X-SEL-JX/KX)