beautypg.com

5 complement function, 6 help function, 5 complement function -5 – Hitachi GR2000 Series User Manual

Page 67: 6 help function -5

background image

Command operation

GR2K-GA-0015

3-5

Ver. 07-02

3.2.5

Complement Function

The number of filenames, command names or command parameters when the
command input can be decreased by entering [TAB] on the command line.

Figure 3-7 Simplification of Command Input by Complementing Filename

3.2.6

Help Function

Commands or parameters that can be specified may be retrieved by inputting the “?”
key on the command line. The significance of the commands and parameters can be
known. Figure 3-8 shows the display examples of the “?” key inputs.

Figure 3-8 Display Examples of the “?” Key Inputs

If the “?” key is entered without using a space for the parameter, the complementary
function is executed.

(config)# li[TAB]
line line-group linerouter

(config)# line

A list of parameters and file names which can be used under pushing [TAB]

key is displayed.

(config)# line line0 [TAB]

25atm ct3 j2 oc48pos t3

aps_protection e1 oc12atm pri

bri e3 oc12pos priisdn

briisdn ethernet oc3atm serial

ce3 gigabit_ethernet oc3pos t1

(config)# line line0 [TAB]

> show ip ?

bgp Display BGP information

cache Display the conditions of policy route group information

cpu-load Display CPU load of the IP routing program

dvmrp Display DVMRP protocol information

entry Display a detail information of a particular route

igmp Display IGMP protocol information

interface Display the information of interface

local Display summarized policy routing information

mcache Displays multicast routing information

memory Display memory usage status by the IP routing program

mroute Display all PIM-SM routing information

mstatic Displays information about joining statically a multicast

group

ospf Display OSPF protocol information

pim Display PIM protocol information

policy Display Policy Routing Information

rip Display RIP information

route Display all route

rpf Display RPF information for multicast source address

task Display the task information of the IP routing program

timer Display the timer information of the IP routing program

vpn Display VPN information

>