Hitachi GR2000 Series - Manual (Page 123)

Confirmation of interface state and routing state
GR2K-GA-0015 5-23
Ver. 07-02
Figure 5-42 Result of show ip pim neighbor Command
5.4.2.3 Transmission source route information
Execute a show ip rpf command and confirm the transmission source route
information.
Figure 5-43 Result of show ip rpf Command
> show ip pim neighbor
Address Interface NeighborAddress Uptime Expires
192.10.10.1 Multi1 192.10.10.3 00:05 01:40
192.10.10.5 00:10 01:35
>
This Router
PIM Router
PIM-Hello
192.10.10.3
ulti2
192.10.20.1)
Multi1 (192.10.10.1)
PIM Router
192.10.10.5
Nbr Count = 2 because wto
neighbor PIM router exists.
Router
(non-PIM)
PIM-Hello
> show ip rpf 192.5.5.100
RPF Information for ? (192.5.5.100):
If multi1 NextHop 192.10.10.1 proto 103
>
This Router
PIM Router
192.5.5.100
192.10.10.1
multi1 (192.10.10.1)
PIM Router
Network
Server1
IP multicast packet from Server1.