Hitachi GR2000 Series User Manual
Page 101

GR2K-GA-0015
5-1
Ver. 07-02
Chapter 5
Confirmation of interface state and
routing state
This chapter describes the confirmation of interface state and routing state to be
performed after network configuration is set using a configuration definition
command or when a trouble occurs during operation. The major sections are as
follows:
Section 5.1, “Confirmation of network interface state” on page 5-2,
Section 5.2, “Confirmation of IPv4 network state” on page 5-7,
Section 5.3, “Confirmation of IPv4 Unicast Routing Information” on page 5-18,
Section 5.4, “Confirmation of IPv4 Multicast Routing Information” on page 5-21,
Section 5.5, “Confirmation of IPv6 network state” on page 5-29,
Section 5.6, “Confirmation of IPv6 Unicast Routing Information” on page 5-37,
Section 5.7, “Confirmation of IPv6 Multicast Routing Information” on page 5-40,
Section 5.8, “Confirmation of MPLS Communication [ROUTE-OS7]” on page 5-45,
Section 5.9, “Confirmation of Qos function” on page 5-48,
Section 5.10, “Confirmation of multi-protocol communication” on page 5-50, and
Section 5.11, “Confirmation of SNMP agent communication” on page 5-54.
Unless otherwise specified, commands discussed in this chapter are fully
documented in GR2000 Operations Commands, Vol. 1 or GR2000 Operations
Commands, Vol. 2.