Hitachi GR2000 Series - Manual (Page 170)

Hitachi Gigabit Router GR2000 Series Enhanced Version Operations - Device Management Overview
7-4 GR2K-GA-0015
Ver. 07-02
7.1.5 Capacity of MC is insufficient
The usage rate of a file system remains at 100% even if the file is deleted and a space
area is secured when the usage rate of a file system in MC exceeds 100%. In this
case, configuration definition information may not be able to be saved or a file may
not be able to be copied. Shutting down or re-actuating the device in such a case will
destroy the MC file system. Follow the procedure below when the usage rate of a file
system is 100% or when a command cannot be executed due to insufficient capacity
of MC.
1. Confirm the space of a file system in MC referring to Section 6.5, “Confirming MC
capacity”. Delete unnecessary files to secure space when no space area exists in
a file system.
2. If the file system use rate is still at 100% even after unnecessary files have been
deleted and the vacant area has been assured, execute the du-s/primaryMC
command. If this command is executed, file system information will be updated
and be written into to MC.