Hitachi GR2000 Series - Manual (Page 149)

Confirmation of interface state and routing state
GR2K-GA-0015 5-49
Ver. 07-02
Figure 5-89 Output priority queue information display
5.9.2 Confirming the communication with the policy server
Confirm the communication state between the COPS agent of the router and the
policy server from the router using a show cops servers command. Confirm that the
connection state is "Connected" as described below. See Subsection 7.12.1,
“Communication failures with Policy-Server”. when the connection with the policy
server cannot be performed.
Figure 5-90 Output priority queue information display
> show qos queueing nif 1 line 3 input
NIF1 Line3: 10BASE-T half TX
Interface name: tokyo1
Limit Qlen : 255
Priority1 Qlen : 87 Priority2 Qlen : 112
Priority3 Qlen : 215 Priority4 Qlen : 58
Priority5 Qlen : 66 Priority6 Qlen : 32
Priority7 Qlen : 147 Priority8 Qlen : 178
Priority1 maximum Qlen : 148 Priority2 maximum Qlen : 139
Priority3 maximum Qlen : 227 Priority4 maximum Qlen : 89
Priority5 maximum Qlen : 129 Priority6 maximum Qlen : 78
Priority7 maximum Qlen : 194 Priority8 maximum Qlen : 233
Total out frames : 2784609
Total out bytes : 178214976
Total discarded frames due to queue overflow : 2375
>
> show cops servers
Current server : Primary
Server IP Address Port Status
Primary server 172.16.250.149 3101 CONNECTED
Backup server 172.16.250.150 111 DISCONNECTED
[Omitted hereinafter.]
>