beautypg.com

1 confirmation of network interface state, 1 physical interface, 2 tag-vlan communication – Hitachi GR2000 Series User Manual

Page 102: 1 confirmation of network interface state -2, 1 physical interface -2, 2 tag-vlan communication -2

background image

Hitachi Gigabit Router GR2000 Series Enhanced Version Operations - Device Management Overview

5-2

GR2K-GA-0015

Ver. 07-02

5.1

Confirmation of network interface state

5.1.1

Confirming the operational state of Ethernet and Gigabit Ethernet lines

The operational state of Ethernet and Gigabit Ethernet lines is confirmed in the
following way.

5.1.1.1

Physical interface

In connecting a line from the router to a network, execute a show interfaces
command and confirm that the display in display item is "active" (in
normal operation) and that the display in is "active up" (in normal
operation), when Ethernet and Gigabit Ethernet lines are used.

Figure 5-1 Example of display of Gigabit Ethernet line connection state

See Subsection 7.4.1 Ethernet and Gigabit Ethernet lines cannot be connected for
measures to be taken when the operational state is abnormal.

5.1.1.2

Tag-VLAN communication

Confirm the following when a Tag-VLAN communication function is set in the
Ethernet and Gigabit Ethernet lines of the router.

(a) Confirmation of operational state

Specify the Ethernet and Gigabit Ethernet lines in which Tag-VLAN is set, using a
show interfaces command and confirm that the display in display item state> is "active" (in normal operation) and that the display in is
"active up" (in normal operation). Also confirm that the vlan line information set
using a configuration definition command (vlan) is displayed.

Figure 5-2 Example of display of summary information in VLAN line

> show interfaces nif 0 line 0

2000/04/02 12:00:00

NIF0: active 1-port 1000BASE-SX retry:2

Average:700/2000Mbps Peak:750Mbps at 08:10:30

Line0: active up 1000BASE-SX full 00:00:87:40:0a:01

[Omitted hereinafter.]

>

> show interfaces nif 0 line 0

2000/04/02 12:00:00

NIF0: active 1-port 1000BASE-SX retry:2

Average:700/2000Mbps Peak:750Mbps at 08:10:30

Line0: active up 1000BASE-SX full 00:00:87:40:0a:01

Time-since-last-status-change:10:30:30

[Omitted halfway.]

VLAN:1 Interface name: TokyoOffice1 description: Network1

VLAN:2 Interface name: TokyoOffice2 description: Network2

>