8 confirm that vrrp is synchronized, 8 confirm that vrrp is synchronized -32 – Hitachi GR2000 Series User Manual
Page 132
Hitachi Gigabit Router GR2000 Series Enhanced Version Operations - Device Management Overview
5-32
GR2K-GA-0015
Ver. 07-02
Figure 5-60 Multipath route information display
(b) Confirm communication with the relevant destination address.
Confirm using a ping ipv6
communicate with the router used as a communication peer. Specify the router’s
local IPv6 address of the interface, used for load balance, for
the ping ipv6 command.
5.5.8
Confirm that VRRP is synchronized
The contents of confirmation when a VRRP function is used in the router are as
described below.
5.5.8.1
Confirmation after setting of configuration definition
(a) Confirmation of route information
Execute a show vrrpstatus detail command and confirm whether the setting
contents of VRRP information defined using a configuration definition command
(virtual-router) are reflected properly.
> show ipv6 route
Total: 4 routes
Destination Next Hop
Interface Metric Protocol Age
::1/128 ::1
localhost 0/0 Direct 51m 45s
3ffe::/64 fe80:11::1
LAN11 0/0 Static 50m 30s
fe80:12::1
LAN12 - - -
fe80:13::1
LAN13 - - -
fe80:14::1
LAN14 - - -
fe80::/64 fe80:20::1
v11 0/0 Direct 51m 27s
fe80:20::1/128 ::1
localhost 0/0 Direct 50m 30s 29s
>