Cause, What to do – Canon imagePROGRAF GP-4000 User Manual
Page 958
4911
Cause
The media type specified in the printer driver is not the same as the media type loaded in the printer.
What to Do
Tap
OK
on the touch screen to go to the next screen.
Check the media type and size that appear and tap
OK
.
•
Changing the printer driver print settings
•
Follow the steps below to match the media type in the printer driver and the media type specified for
the printer.
1. Tap
Cancel
on the touch screen to stop printing.
2. Change the media type in the printer driver settings to the media type loaded in the printer, and
then try again.
•
Replacing paper
•
Follow the steps below to match the media type in the printer driver and the media type specified for
the printer.
1. Tap
Replace the paper and print
on the touch screen to stop printing.
2. Load the paper with the media type set in the printer driver, and then try again.
2.
Loading and Printing on Rolls
Loading and Printing on Sheets
•
Printing without changes
•
To continue printing, tap
Print with the loaded paper.
on the touch screen.
However, note that this error may cause paper jams and affect the printing quality.
958