Canon imagePROGRAF GP-4000 - Manual (Page 826)

1022
Cause
Received print job that is longer than paper length remaining on Roll 1 (Upper).
What to Do
• Continuing to print •
To continue printing, tap Print with the loaded paper. on the touch screen.
However, the roll paper may run out during the print job and you may not be able to print all of the
document.
• Replacing paper •
Tap Replace the paper and print on the touch screen.
Change the Paper Source in the printer driver, or replace the paper with paper of the right length for
the print job, and then try again.
Removing the Upper Roll from the Printer
Loading the Upper Roll on the Printer
• Stopping printing •
To stop printing, tap Cancel or Stop on the touch screen.
826