For chrome on android – Canon imagePROGRAF GP-4000 User Manual
Page 262
To display the printer's root certificate thumbprint in
Root cert. thumbprint (SHA-1)
or
Root cert.
thumbprint (SHA-256)
, tap
Printer information
>
System information
on HOME screen of the
operation panel.
6.
If fingerprint of certificate detail information matches printer's thumbprint, display
6.
information on certificate from the menu or by double-clicking the certificate, and select
Always Trust
on
Trust
.
The root certificate registration is completed.
Note
• If a password is set on your device, entering a password may be required.
For Chrome on Android
1.
Select
For secure communication
on Remote UI.
1.
2.
Select
Download
.
2.
Downloading the root certificate is started and then
Name the certificate
screen is displayed.
3.
As entering the root certificate name is required, enter an arbitrary certificate name and
3.
select
OK
.
The root certificate registration is completed.
Note
• If PIN or password is not set as security type, the attention screen may appear. Select
OK
, and
then set the security type to PIN or password.
After Root Certificate Registration
We recommend that you make sure that the correct root certificate has been registered.
To make sure that the correct root certificate has been registered, make sure that thumbprint of
certificate information matches printer's thumbprint. Follow the steps below.
Note
• Some Android devices cannot be checked the thumbprint of a registered route certificate.
1.
From
Settings
menu on your device, select
Security
,
Trust credentials
, and
USER
.
1.
The list of downloaded certificates appears.
2.
Select downloaded certificate.
2.
The certificate information appears.
3.
Make sure that thumbprint of certificate information matches printer's thumbprint.
3.
262