Canon imagePROGRAF GP-4000 - Manual (Page 306)

Use Spanning Tree Use spanning tree On/Off
Use Dedicated Port Dedicated port setting On/Off
SNMP Setting SNMP setting information -
Use SNMPv1 Use SNMPv1 On/Off
Use SNMPv3 Use SNMPv3 On/Off
SNMP Community Name1 SNMPv1 community name 1 XXXXXXXX (up to 32 characters)
SNMP Community Name2 SNMPv1 community name 2 XXXXXXXX (up to 32 characters)
SNMP Extra Access Authority SNMPv1 extra access authority Disable/Read Only/Read Write
SNMP Access Authority1 SNMPv1 community1/2 access authority Disable/Read Only/Read Write
SNMP Access Authority2 SNMPv1 community1/2 access authority Disable/Read Only/Read Write
SNMPv3 Setting SNMPv3 setting information -
User1 User 1 -
User Name User name XXXXXXXX (up to 32 characters)
Use SNMPv3 Use SNMPv3 On/Off
MIB Access Restriction MIB access restriction Disable/Read Only/Read Write
Security Setting Security setting No Auth No Priv/Auth No Priv/Auto Priv
Authority Algorithm Authority algorithm Null/MD5/SHA1
Encryption Algorithm Encryption algorithm Null/AES/DES
User2 User 2 -
User Name User name XXXXXXXX (up to 32 characters)
Use SNMPv3 Use SNMPv3 On/Off
MIB Access Restriction MIB access restriction Disable/Read Only/Read Write
Security Setting Security setting No Auth No Priv/Auth No Priv/Auto Priv
Authority Algorithm Authority algorithm Null/MD5/SHA1
Encryption Algorithm Encryption algorithm Null/AES/DES
User3 User 3 -
User Name User name XXXXXXXX (up to 32 characters)
Use SNMPv3 Use SNMPv3 On/Off
MIB Access Restriction MIB access restriction Disable/Read Only/Read Write
306