Canon imagePROGRAF GP-4000 - Manual (Page 545)

5. Click Borderless Setting 5.
When the Borderless Setting dialog box is displayed, place a checkmark next to Three-sided
Borderless , and then click OK .
6. Select a method for printing borderless 6.
In the Borderless Printing Method tab, place a checkmark next to the Print Image with Actual Size
option.
7. Complete the setting process 7.
Click OK .
If you print now, the document will be printed without margins on three sides while retaining the same
document size.
8. Cut the right side of the paper 8.
Cut the margin on the right side of the paper with scissors after printing.
To get the document to standard size, it is recommended to take measurements and cut in the correct
positions.
Important
• If you place a checkmark next to the Borderless Printing option, the Page Layout and Print Centered
options in the Layout tab will be displayed in gray out and you will not be able to configure them.
• Depending on paper size, the length/width ratio of the paper may be different from that of the image,
making it impossible for the whole image to fit on the paper.
When this happens, crop the image with the application software to match paper size.
• When printing borderless, printing may stop abruptly and the paper will be cut causing a slight color
unevenness on the edges of the paper. If you require exceptionally high quality, in the Roll Paper
Options dialog box select No from the Automatic Cutting list. When you do so, the document will be
printed without the left margin. After the printed material has exited the printer and has been cut, cut the
upper, lower, and right edges with a pair of scissors.
• When printing borderless on paper with low ink-fixing properties, depending on frequency of use, the
cutter unit may come into contact with the paper surface scratching it and causing the paper to be
unevenly cut.
545