Canon imagePROGRAF GP-4000 - Manual (Page 88)

Loading Rolls on the Roll Holder
When printing on roll paper, attach the roll paper to the Roll Holder.
Roll paper comes in two types: 2-inch and 3-inch cores. If using 3-inch core roll paper, attach the 3-Inch
Paper Core Attachment to the Roll Holder and holder stopper.
Caution
• Set the roll on its side on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and •
dropping a roll may cause injury.
Important
• When handling the roll, be careful not to soil the printing surface. This may affect the printing quality. •
We recommend wearing clean cloth gloves when handling rolls to protect the printing surface.
• Cut the edge of the roll paper if it is uneven, dirty, or has tape residue. Otherwise, it may cause feeding •
problems and affect the printing quality. Be careful not to cut through any barcodes printed on the roll.
• Align the edges of the paper on both ends of the roll. This may cause feeding problems. •
Note
• For details on roll paper sizes and types that can be used, see " Paper Sizes " or "Paper Information •
List".
88