Canon imagePROGRAF GP-4000 - Manual (Page 521)

Scaled Printing
The procedure for printing a document with pages enlarged or reduced is as follows:
1. Open the printer driver setup window 1.
2. Select the paper size of the document 2.
Using Page Size on the Page Setup tab, select the page size that is set with your application software.
3. Select the paper source 3.
For Paper Source , select the setting that matches your purpose.
Important
• The paper feed method will differ depending on the lower level (roll paper 2) settings or roll unit
option settings.
4. Select roll paper width 4.
If you selected a roll paper for Paper Source , set Roll Paper Width to the width of the roll paper loaded
in the printer.
5. Select scaled printing 5.
Check the Enlarged/Reduced Printing check box.
6. Set one of scaling methods described below 6.
From the items listed below, select the setting that matches your purpose and select the corresponding
check box.
The current settings are displayed in the settings preview on the left side of the window.
521