Canon imagePROGRAF GP-4000 - Manual (Page 527)

Setting Paper Dimensions (Custom Size)
You can specify the height and width of paper when its size cannot be selected from the Page Size . Such a
paper size is called "custom size."
There are two ways of setting a user-defined paper, setting the paper from Size Options... on the Page
Setup tab and setting the paper from Custom Size of Page Size .
If you will be using a user-defined paper repeatedly, setting it from Size Options... is convenient because it
becomes registered to Page Size and can be selected any time after that.
If you want to use a user-defined paper temporarily, setting it from Custom Size is suitable.
The procedure for specifying a custom size is as follows:
Setting from Paper Size Options
1. Open the printer driver setup window 1.
2. Click Size Options... on the Page Setup tab 2.
The Paper Size Options dialog box opens.
3. Set user-defined paper 3.
Set Custom Paper Size Name , Units , and Size , and then click Add .
For Size , specify an size or select the paper size to be used from Paper Size List .
To narrow down the paper sizes displayed in Paper Size List , select the Display Series check box.
527