Canon imagePROGRAF GP-4000 - Manual (Page 137)

Reducing Dust from Cutting Rolls
If the paper tends to generate dust when cut, such as with Backlit Film, you can reduce flying dust by setting
Cut-dust reduction to ON from the touch screen menu, which will coat the leading and trailing edges of the
printed document with ink. As a result, you can reduce problems with the print head. You can set Cut-dust
reduction according to the media type.
Important
• Do not set Cut-dust reduction to ON for paper that wrinkles easily, such as Plain Paper or lightweight •
paper. If not cut properly, the paper may jam.
• Borderless printing is not available when Cut-dust reduction is set to ON . When performing borderless •
printing, set Cut-dust reduction to OFF .
Follow these steps to set Cut-dust reduction to ON .
1. Tap paper settings display area on Home screen of touch screen. 1.
Note
• If the Home screen does not appear, tap the HOME button. •
2. Tap or area. 2.
3. Tap Paper settings . 3.
4. Tap Advanced . 4.
137