beautypg.com

Hard disk settings – Canon imagePROGRAF GP-4000 User Manual

Page 235

background image

Hard disk settings

Select this setting item from

Printer settings

.

Important

• The administrator password is required to change settings if it is enabled for changing settings using the

operation panel.

Output method

Selects the printing method for jobs received from software other than the printer driver. When using the
printer driver, configure settings on the printer driver.

Print

Performs printing as usual.

Print (auto delete)

Deletes the data from the printer's hard disk after printing is completed.

Save to job box

Only saves the print job in job box without printing it.

Save first and print

A setting for jobs received from software other than the printer driver. When using the printer driver,
configure settings on the printer driver. Select

ON

to print the job after it has been saved.

Common job box settings

Select

Print (auto delete)

to print without saving jobs in common job box.

File deletion settings

Selects the data erasing method when deleting a

Print job

or

Saved job

, or when

Print (auto delete)

is

selected in

Output method

or

Common job box settings

.

Fast

Erases file management data for print job data stored on the printer's hard disk. Choose this method
for relatively fast erasure. Because only the file management data is erased, the print job data itself
is not erased.

Fast secure

Erases the data encryption key specified for the hard disk drive. Specifying the encryption key again
does not allow you to read and use data saved in the past safely and fast. Select to erase highly
confidential data.

Secure

Overwrites the entire hard disk with 00, FF, and random data (one time each) after the data
encryption key specified for the hard disk drive is erased. Verification is performed to check if the
data was correctly written. Choose this method to erase especially confidential data. It is virtually
impossible to recover the overwritten data. Conforms to the DoD5220.22-M standard of the U.S.
Department of Defense.

235