Canon imagePROGRAF GP-4000 User Manual

Page 726

Cutter Blade Does Not Work While Cutting Is in Progress

Check 1

Does a message appear on the touch screen?

If the cutter blade failed to cut the paper, it stops moving and a message appears on the touch screen.

Remove the paper and try printing again.

Check 2

Make sure the cutter blade can cut paper used currently.

Select

User cut

for

Cutting mode

in the touch screen menu and cut the roll paper with a cutting implement such

as scissors.

Check 3

Check the setting value for

Cut speed

Selecting slower value may enable the cutter blade to cut paper.

Tap paper settings display area on Home screen of touch screen, tap the feed slot where the paper to change is
set, then tap

Paper settings

Advanced

and, change the setting value of

Cut speed

Menu Structure
Paper-related settings

Check 4

Is the edge of the cutter blade blunt?

Replace the cutter blade.

726