Adjusting line length – Canon imagePROGRAF GP-4000 User Manual
Page 339
Adjusting Line Length
To ensure that lines in CAD drawings are printed at exactly the right length, use
Adjust feed length
to
adjust the amount that paper is advanced.
There are two options in
Adjust feed length
:
Print alignment pattern
and
Change adjustment values
.
Note
• We recommend executing the adjustment if you have changed the paper type or paper size.
• Always check the
Set priority
values before adjustment.
•
Selecting Feed Amount Adjustment Method
Items to Prepare
When Using Rolls
• An unused roll at least 254.0 mm (10.00 in) wide
• High-precision ruler
When Using Sheets
• One sheet of unused paper of at least A4/Letter size
• High-precision ruler
Follow the procedure below to adjust.
1.
Load paper.
1.
Loading the Upper Roll on the Printer
Loading the Lower Roll on the Roll Unit (Option)
Loading Sheets in the Printer
Important
• Always make sure the loaded paper matches the type of paper specified.
•
Adjustment cannot be completed correctly unless the loaded paper matches the settings.
2.
Tap
Maintenance
on HOME screen.
2.
3.
Tap
Paper feed adjustment
.
3.
4.
Tap
Adjust feed length
.
4.
5.
Tap
Print alignment pattern
or
Change adjustment values
.
5.
• If you tap
Print alignment pattern
:
•
The test pattern is printed for you to measure the scale and calculate the discrepancy.
The scale bar prints "Millimeter" in 50 mm increments and "Inch" in 1-inch increments.
339