Canon imagePROGRAF GP-4000 - Manual (Page 567)

4. Select the paper source 4.
For Paper Source on the Page Setup tab, select the setting that matches your purpose from Roll Paper
(Auto) , Roll 1 , and Roll 2 .
Important
• The paper feed method will differ depending on the lower level (roll paper 2) settings or roll unit
option settings.
5. Select roll paper width 5.
For Roll Paper Width , select the width of the roll paper loaded in the printer.
6. Selecting Paper Saving 6.
On the Layout tab, select the No Spaces at Top or Bottom check box.
The current settings are displayed in the settings preview on the left side of the window.
567