Opens the, Custom, Dialog box – Canon imagePROGRAF GP-4000 User Manual

Page 627: View settings, Custom dialog box, View settings dialog box

Cut Speed

Select auto-cut speed. This can be adjusted when paper cannot be cut precisely with auto-cut.

Printer Default

Settings in printer unit operation panel are applied.

Fast

Select when cut is not smooth with

Standard

settings.

Standard

Select when there are no particular problems with auto-cut.

Slow

If this is selected for paper with adhesive, the cutter will not stick to the adhesive easily and it will
slow deterioration of the cutter's capabilities.

Unidirectional Printing

Controls color unevenness and unaligned ruled lines.
Please check when printing in one direction.

Calibration Value

The results can be applied when printing in the event color calibration was set in printer unit. Please
select

Use Value

when applying calibration.

Mirror

Select whether to print reflected image or not. When you select this check box, text and images will
be printed as if reflected in a mirror.

Custom dialog box

Set the quality level, and select the desired print quality.

Quality

You can use the slider bar to adjust the print quality level.

Important

• Certain print quality levels cannot be selected depending on the settings of

Media Type

Note

• The

Highest

High

, or

Standard

print quality modes are linked with the slider bar. Therefore

when the slider bar is moved, the corresponding quality and value are displayed on the left. This
is the same as when the corresponding quality is selected for

Print Quality

on the

Main

tab.

View Settings dialog box

Print Target

Select the print purpose. The settings of the selected print purpose are displayed in