Canon imagePROGRAF GP-4000 - Manual (Page 305)

Wireless LAN Setting Wi-Fi setting information -
Channel Channel (infrastructure) XXX (0 to 255)
SSID SSID Wi-Fi (infrastructure) SSID (up to 32
characters)
Security Type Security type for Wi-Fi (infrastructure) Disabled/WEP 64bit/WEP 128bit/WPA
PSK TKIP/WPA PSK AES/WPA2 PSK
TKIP/WPA2 PSK AES/MIXED
WEP1 WEP key 1 for Wi-Fi (infrastructure) XXXXXXXX (up to 32 characters)
WEP2 WEP key 2 for Wi-Fi (infrastructure) XXXXXXXX (up to 32 characters)
WEP3 WEP key 3 for Wi-Fi (infrastructure) XXXXXXXX (up to 32 characters)
WEP4 WEP key 4 for Wi-Fi (infrastructure) XXXXXXXX (up to 32 characters)
WEP Certificate WEP certificate for Wi-Fi (infrastructure) Open/Shared/Auto
WEP Format WEP format for Wi-Fi (infrastructure) Hex/String
Direct Connection Setting Wireless direct setting information -
Device Name Wireless direct device name Wireless direct device name (up to 32
characters)
Channel Channel (Wireless direct) XXX (0 to 255)
SSID SSID Wireless direct network (SSID)(up to 32
characters)
Security Type Security type for Wi-Fi (Wireless direct) Disabled/WPA2 PSK TKIP/WPA2 PSK
AES
WSD Setting WSD setting information -
Use WSD Use WSD On/Off
WSD Timeout Timeout 1/5/10/15/20 [min]
Use WSD Rx Optimization Use WSD reception optimization On/Off
Protocol Setting Protocol setting information -
Printer Name Printer name XXXXXXXX (up to 16 characters)
Use LPR Use LPR On/Off
Use Wired DRX Discontinuous reception (Wired LAN) On/Off
Use Wireless DRX Discontinuous reception (Wi-Fi) On/Off
Use RAW Use RAW On/Off
Use LLMNR Use LLMNR On/Off
305