Paper is not cut – Canon imagePROGRAF GP-4000 User Manual
Page 725
Paper is not cut
Check 1
Is
Automatic Cutting
in the printer driver set to
No
or
Print Cut Guideline
?
Set the printer driver
Automatic Cutting
setting to
Yes
.
Quality & Media (macOS)
Check 2
Is
Cutting mode
in the touch screen menu set to
Eject cut
or
User cut
?
If
Cutting mode
is set to
Eject cut
, select
Feed/cut
in the touch screen menu and cut the paper.
If
Cutting mode
is set to
User cut
, cut the roll paper with a cutting implement such as scissors.
Specifying the Cutting Method for Rolls
Check 3
Is the cutter blade attached?
Attach the cutter blade.
Check 4
Is the cutting method for paper ejected after printing set to
Do not cut
when
the roll unit is set to
Take-up mode
?
Follow the steps below to change the settings.
1. Select the roll unit on the touch screen.
1.
2. Select
Use in take-up mode
, and then select
Use the cutting mode setting
.
2.
3. Set the
Cutting mode
for
Roll paper 1
on the touch screen to
Automatic cut
.
3.
725