Canon imagePROGRAF GP-4000 - Manual (Page 637)

Layout Tab Description
The Layout tab allows you to specify how to arrange the document onto the paper. You can also set the
number of copies to be printed and the print sequence. If the application software that you used to create
the document features the same functions, specify the settings from the application software.
Settings Preview
The paper illustration shows how the original will be laid out on a sheet of paper.
You can check an overall image of the layout.
The printer illustration shows how to load paper to match the printer driver settings.
Check whether the printer is set up correctly by looking at the illustration before you start printing.
Page Layout
Selects the size of the document you want to print and the type of printing.
Poster (1 x 2)/Poster (2 x 2)
Printing is performed with poster settings.
The value in parentheses represents the ratio of the vertical x horizontal lengths. As the number of
divisions increases, the number of sheets used for printing increases. If you are pasting pages together
to create a poster, increasing the number of divisions allows you to create a larger poster.
Set...
Opens the Pages to Print dialog box .
Specify this setting when you want to print only specific pages.
Free Layout
You can freely position and print any document created with an application software.
You must install imagePROGRAF Printer Driver Extra Kit to use this function. Go to the Canon website,
download imagePROGRAF Printer Driver Extra Kit, and then install it.
Set...
Opens the Free Layout Settings dialog box .
You can freely specify detailed settings for free layout.
637