Canon imagePROGRAF GP-4000 - Manual (Page 465)

Printing with Easy Setup
This section describes the simple setting procedure so that you can carry out appropriate printing on this
printer.
Printing with Easy Setup
1. Check that printer is turned on 1.
2. Load paper on the printer 2.
Set roll paper or cut paper to a printer.
3. Open the printer driver setup window 3.
4. Select the media type 4.
Select the type of paper loaded in the printer from the Media Type list on the Main tab.
Important
• See "Paper Information List" for Canon authentic paper or Canon output check paper.
Note
• Click Get Information... to display the Paper Information on Printer dialog box. The Paper
Information on Printer dialog box allows you to get the paper information from the printer and
to set the paper source and the media type on the printer driver.
If
Roll Paper (Auto) is selected for the paper source, it will remain as Roll Paper (Auto) even if
you get the paper information from the printer.
• For instructions on changing the media type from the printer's operation panel, see " Changing
the Type of Paper ."
465