Canon imagePROGRAF GP-4000 User Manual
Page 257
Selecting
Enable HTTPS redirection
redirects the communication using CHMP to encrypted
communication.
Note
• To use CHMP for encrypted communication, you need to register the printer's root certificate to
your computer.
Registering Printer's Root Certificate to Local Computer for SSL Communication
• CHMP is a Canon proprietary protocol.
◦
Network interface settings
◦
To connect to a hub that supports STP, select
Enable
.
Selecting
Enable
perform the intermittent data reception when connecting to the network.
◦
DRX settings
◦
Selecting
Enable
perform the intermittent data reception when connecting to the network.
◦
IP filtering
◦
Allows or denies access for specific IP addresses.
Settings for both IPv4 and IPv6 addresses can be specified.
Important
• If the device address for the administrator has been set to rejection by mistake, initialize the
•
printer's network information, and then perform setup again.
LAN settings
>
Wi-Fi
/
Wireless Direct
/
Wired LAN
>
Settings
>
Advanced setup
>
Reset
LAN settings
◦
MAC address filtering settings
◦
Allows or denies access for specific MAC addresses.
Important
• If the device address for the administrator has been set to rejection by mistake, initialize the
•
printer's network information, and then perform setup again.
LAN settings
>
Wi-Fi
/
Wireless Direct
/
Wired LAN
>
Settings
>
Advanced setup
>
Reset
LAN settings
◦
Reset LAN settings
◦
Initializes the network settings on the printer.
After resetting, perform setup again as necessary.
257