Canon imagePROGRAF GP-4000 - Manual (Page 153)

Using the Basket
By changing the following four items for the basket, you can use the basket in various ways to suit your
application.
• Length of basket arm •
• Tilt of basket arm •
• Attachment position of basket •
• Length of basket •
This section describes how to change the basket.
For specific examples of basket use, see " Example Basket Configurations ."
Important
• When changing the position of the basket, first return the basket to a unwound state while pressing the •
basket rewind button on the right end of the basket rod (tag side), and then make the change.
• If the basket rod (tag side) has come off the basket arm, attach it by inserting the projections on both •
ends of the basket rod (tag side) into oval holes on the tip of the basket arm.
• When moving the printer, remove the basket. •
• Do not apply excessive force to the basket. Doing so may damage the basket. •
• If the cloth part of the basket becomes dirty, wipe off the dirt without washing. Washing it may affect the •
performance of the basket.
Changing Length of basket arm
You can change the length of the basket arm in two steps.
To lengthen, expand the left/right basket arm in the direction of the arrow.
To shorten, contract the left/right basket arm in the opposite direction of the arrow.
153