Canon imagePROGRAF GP-4000 - Manual (Page 583)

Cutting Roll Paper after Printing
The procedure for cutting roll paper automatically and printing cut guidelines is as follows:
1. Open the printer driver setup window 1.
2. Select the paper source 2.
For Paper Source on the Page Setup tab, select the setting that matches your purpose from Roll Paper
(Auto) , Roll 1 , and Roll 2 .
Important
• The paper feed method will differ depending on the lower level (roll paper 2) settings or roll unit
option settings.
3. Display Roll Paper Options dialog box 3.
Click Roll Paper Options to display the Roll Paper Options dialog box.
4. Set auto cut 4.
From Automatic Cutting , select the item that matches your purpose.
The current settings are displayed in the settings preview on the left side of the Page Setup tab.
• Yes •
The roll paper is cut automatically after printing.
• No •
583