Canon imagePROGRAF GP-4000 - Manual (Page 132)

11. Tap OK . 11.
After the roll is rewound, it stops automatically.
Manual (for paper of which the leading edge rubs the print head)
Note
• Once the following step has been performed, the procedure can be started from step 8 the next time. •
Printing the second and subsequent times
Printing after replacing with the same type of paper
1. Tap paper settings display area on Home screen of touch screen. 1.
Note
• If the Home screen does not appear, tap the HOME button. •
2. Tap paper feed slot where roll paper for which you want to set cutting method is loaded. 2.
3. Tap Paper settings . 3.
4. Tap Advanced . 4.
5. Tap Cutting mode . 5.
6. Tap User cut . 6.
7. When Do you want to set to detect the leading edge of the paper? is displayed, select 7.
Do not detect .
Note
• If you set the detection of paper leading edge to Do not detect , a margin of about 4.0 inches •
(10 cm) is created at the paper leading edge when printing starts.
132