Canon imagePROGRAF GP-4000 - Manual (Page 291)

Default Network Settings
LAN Connection Defaults
Item Default
Enable/Disable LAN Wired LAN enabled
Network name (SSID) BJNPSETUP
Communication mode Infrastructure
Wi-Fi security Disable
IP address ( IPv4 ) DHCP
IP address ( IPv6 ) Auto setup
Set printer name *1 XXXXXXXXXXXX
Enable/disable IPv6 Enable
Enable/disable WSD Disable
Timeout settings 15 minutes
Enable/disable Bonjour Enable
Service name Canon GP-NNNN *2
LPR protocol settings Enable
Wi-Fi DRX settings Enable
Wired LAN DRX settings Enable
("XX" represents alphanumeric characters.)
*1 Default value depends on printer. To check value, use operation panel.
LAN settings
*2 NNNN means your printer model name.
Wireless Direct Defaults
Item Default
Network name (SSID) DIRECT-abXX-GP-NNNN *1
Password YYYYYYYYYY *2
Wi-Fi security WPA2-PSK (AES)
Connection request confirmation Displayed
291