Gasboy CFN Series Site Controller III Start-up - Manual (Page 93)

MDE-4793A CFN Series Site Controller III Start-up Manual for CFN III Versions 3.5 and above · November 2008 Page 87
Load Fuel Products, Pumps, Tanks, Prices, and Taxes Start-up Commands
6 Type LO F;C to load the pump number, hose number, product code, price code, and tank
number (
Figure 13-17 ).
Note: If your site is using MPD's, you can set them up all at once by typing an asterisk when
prompted for the Pump number. For more details refer to MDE-4762 Site Controller III
Manager’s Manual for Windows XP Embedded. The LOad Fuel command
automatically sets attribute 8 for that product. If you do not want it to be attribute 8, you
must disable it. Refer to MDE-4762 Site Controller III Manager’s Manual for Windows
XP Embedded, EN PRO command.
Figure 13-17: Example of LO F;C Command with Prompts
P* LO F;C
Pump number? 2
Hose number? 1
Product code? 2
Price code? 2
Tank number? 2
Hose number?
Pump number?
P*
7 Type LO CU;C to load the system’s fill limit and slow cutoff for each hose outlet
( Figure 13-18 ).
Typing just the number is a quantity limit; preceding the number with a dollar sign is a dollar
limit.
Figure 13-18: Example of LO CU;C Command with Prompts
P* LO CU;C
Pump number? 1
Fill limit? 25
Slow cutoff? .500
Pump number?
P*
8 Type LO PR;IC to load the system’s fuel price codes and price levels ( Figure 13-19 ).
Figure 13-19: Example of LO PR;IC Command with Prompts
P* LO PR;IC
Price code? 1
Price level? 0
Price? .899
Price level?
Price code?
P*